手荷物棒往復疲労試験機

製品紹介：

Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stretched to test the gap generated by the tie rod, loosening, connecting rod failure, deformation, etc.

Theory：

luggage trolley handle reciprocating fatigue testing machine -- Under certain pulling and pressing frequency, To check the reciprocating fatigue performance of the pull rod, rod structure of fastness and durability of the switch through the luggage lever lock with a pull rod is continuously pulling switch, reciprocating and pressing.

Usage：

Leather suitcase trolley reciprocating fatigue testing machine is used to test fatigue of the reciprocating rod for the luggage. During the test, the rod would be stretched and then test whether there will be backlash, loose, connecting problems and transformation of the rod.

Design criteria:

QB/T 2919-2010

Technical parameters:

Test travel 20——100cm, adjustable

Maximum drawing speed 0——10 cm/sec, adjustable

Maximum compression speed 0——10 cm/sec, adjustable

Test times 0——999999 times automatic stop

Test the power cylinder

Sensing position Four-point sensing position

The maximum height of the specimen is 100cm

Auxiliary equipment case fixing clamp

Use pressure 5——8kg/cm2

Machine size 80X90X180cm （WXDXH）

The weight is about 120kg

Use power supply AC220V, 50/60Hz, 5A

include 1-6 specified parts:

1、Sample clamp holder: adjust the test size

2、pull rod holder

3、Rod movement device: do reciprocating motion ,and the speed and travel can be adjustable

4、support frame：the height is not less than 1500 mm, Install pulling, pressing travel guide

5、pull rod lock switch gear

6、counter：count the movement times