The resistance tester for protective clothing materials against metal molten liquid penetration

Product Introduction:

The resistance tester for protective clothing materials against metal molten liquid penetration is developed in accordance with testing standards such as ISO 9150, EN 348, GB/T 17599, AQ6103, GB 8965.2, etc. It is applicable to the protective performance of various fabrics and composite fabrics against burns caused by molten metal splashes on the human body. The protective clothing metal molten bead splash tester can evaluate the material's resistance to liquid metal splashes. During the test, an appropriate amount of molten metal is splashed onto the sample placed at a certain angle. A PVC film is attached to the back of the sample and in contact with it. The damage situation is evaluated by recording the changes in the PVC film after the splashing process. Based on the test results, repeat the test with more or less metal until the damage to the PVC film is minimized. A furnace with an induction coil and a high-frequency generator melts the metal. A high-performance optical fiber dual-color pyrometer is used for temperature control and measurement of the splashing temperature. The temperature controller adjusts the temperature between 700°C and 1800°C. A stepper motor controls the tilting speed and angle. The cooling device uses the water flow connected to the inlet and outlet of the equipment for cooling.

Reference Standards:

• BS EN 348:1992 Protective clothing. Heat-resistant and fire-resistant. Determination of heat transfer in proximity to fire.
• ISO 9185 - 2011 Protective clothing. Evaluation of material resistance to metal molten liquid penetration.
• AQ 6103 - 2007 Welder's protective gloves.
• GB 8965.2 - 2009 Protective clothing. Flame retardant protection. Part 2: Welding clothes.

Performance Features:

1. The equipment consists of a control box, a test frame, and a crucible.
2. Crucible: Height 97mm, top diameter 80mm, bottom diameter 56mm, capacity 190ml.
3. Thermocouple: Temperature measurement range 0 - 1800°C, measuring the temperature of molten metal.
4. The test frame is equipped with an automatic flipping device, controlled by a stepper motor for flipping speed and angle.
5. The sample installation angle is adjustable.
6. Equipped with adjustment devices and a ruler to conveniently and accurately adjust the pouring height.
7. Equipped with a clamp for easy grasping, moving, and installing the crucible.
8. A splash metal collection device is installed at the bottom of the test frame.
9. Metal high-frequency melting furnace (optional), melting temperature can reach 1800 - 2000°C.
10. The human-machine interface uses a 7-inch touch screen, with a simple and easy-to-use interface.
11. The equipment control system is automatically controlled by a programmable logic controller.

技術パラメータ:

1. Electrical requirements: 220V, 50HZ.
2. Heating principle: High-frequency furnace.
3. Test environment: -30 - 75°C.
4. Size specifications: 850mm (W) X 650mm (H) X 600mm (D).

5. Weight: 57Kg.