STD-RCF 6 THREE BALL ON ROD MACHINE – 15000 rpm

DescriptionThe STD-RCF 6 machine is designed to run the standard three ball on rod rolling contact

WhatsApp : +86 13816217984

Email : info@qinsun-lab.com

コンテンツ

説明

The STD-RCF 6 machine is designed to run the standard three ball on rod rolling contact fatigue test geometry, in which three balls, separated by a retainer, are loaded against a rotating rod specimen, by applying an axial force across two taper bearing cups, mounted above and below the three balls.

Technical Specifications

Test Geometry:	Ball on rod
Rod Diameter:	9.53 mm and 10 mm
Ball Diameter:	12.7 mm
Motion:	Rotary
Contact Load:	200 to 1200 N
Fatigue Cycles per Revolution:	2.3828 with 9.53 mm diameter rod
	2.3654 with 10 mm diameter rod
Speed:	300 to 15.000 rpm
Motor:	1.4 kW @ 15.000 rpm
Temperature:	Ambient to 80°C
Test Stations:	Up to 6
Control:	PLC
Lubricant Service Module:	Included

Manually Controlled Parameters

Load:	Pneumatic – actuators in parallel
Rotational Speed:	Each test station independently controlled
Temperature:	Each test station independently controlled
Vibration Level:	Each test station

Data Logged Parameters

Load:	Pressure transducer – one per installation
Temperature:	Yes – each test station
Test Duration:	Yes – each test station


Services

Electricity per Test Station:	220/240V, single phase, 50 Hz, 4.5 kW
	110/120V, single phase, 60 Hz, 4.5 kW
Clean, dry air:	4 cfm at 8 bar (120 psi)