Building Materials Combustion Calorimeter

The characterization of material combustion calorific value is an important parameter to assess the fire risk of building materials, which provides key data for calculating the heat release and fire load of materials. The test instrument is the necessary equipment for the classification of ISO 1716-2002; the combustion calorific test device is developed according to the requirements of ISO 1716-2002 standard. The combustion calorific value of building materials is measured in a bomb calorimeter with a constant heat capacity.

Application:

Building materials

Combustible materials, etc.

Standard:

GB/T213-2008 "Coal calorific value determination method"

ASTM D5865-13 - Determination of Calorific Value of Coal and Coke

GB/T384-1981 "Determination of calorific value of Petroleum products"

GB/T30727-2014 "Determination of calorific value of solid biomass fuel"

ISO 1928:2009 Determination of calorific value of solid fossil Fuels

Features:

1. The ISO 1716 Flammability Testing Equipment with Good Price including calorimeter apparatus, high-pressure oxygen bomb, cold water installations, computer, and control system (which can record and display the curve), LCD screen and software; Crucible made of stainless steel;

2. Box paint treatment; all internal parts are made of stainless steel, corrosion-resistant, easy to clean;

3. Ignition wire break is detection and automatic ignition.

4. The test procedure automatically turns off.

5. Test abnormalities has a sound alarm.

6. Computer control system:

7. Control box with USB / RS232 serial port with an external brand desktop or laptop operating control; High degree of automation, test procedure safe and reliable, easy to operate;

Parameters:

Test Procedures

1. Preparation

Before using the building materials combustion value tester, some preparatory work must be done. Identify the building material samples to be tested, prepare the necessary testing tools and materials, and ensure the equipment is functioning properly.

2. Sample Preparation

Cut the building material samples to be tested into appropriate sizes and shapes, ensuring that the surface is flat and free from obvious damage or deformation. Clean the sample surface to remove dust and impurities to avoid affecting the test results.

3. Equipment Operation

a. Turn on the power switch of the building materials combustion value tester, ensuring that the equipment is properly powered. Select the appropriate test mode and parameter settings according to actual needs.

b. Place the sample on the test platform, ensuring a tight fit to prevent air circulation. Start the test program and begin the test. During the test, observe the changes in the instrument data and maintain stable operation of the equipment.

4. Recording and Analysis of Results

After the test is completed, record the relevant data and test results. Analyze and compare the data according to the actual situation. Scientifically interpret the results and draw conclusions. Based on the test results, evaluate the combustion performance of the building materials and determine whether they meet the relevant standard requirements.